The Australian Wildflowers Dress

Although I do own a lot of original and reproduction vintage patterns and sew with them regularly, I do always try and pull them out especially in September for Sew Vintage September. Especially with Covid lockdown again it is nice to be able to see everyone's makes on Instagram and feel connected to others joining in the vintage sewing for the month.

Both the pattern and fabric have been in my stash for several years, although I hadn't really thought about them together. The fabric is such an amazing print but also very large, so it needed something that would do it justice. A full dress was always going to be the best option, but what sort of dress was the question, particularly how to make sure the skirt showed off the print. I had been thinking a circle skirt as it wouldn't hide anything in gathers, but the directional print would have meant some flowers ended up sideways or even upside down. In the end looking through my patterns and fabrics with both Sew Vintage September and the Whole 30 Fabric Challenge in mind led me to pull both fabric and pattern out together for the first time.

This absolutely beautiful fabric is one I picked up at a Sydney Spoolettes fabric swap a few years ago. The fabric design is called Australian Wildflowers and is covered in botanical drawings of different wildflowers, complete with common and scientific names as well as the states and territories they grow in.  There are flannel flowers, spider flowers, swamp and Sydney golden wattle, Cooktown, lemon and blue lady orchids, kangaroo paw, brown boronia, Sturt's desert pea and waratahs among others. The colours are wonderfully vibrant, and although a few arent' quite accurate to the flowers they depict they are all equally lovely drawings.

The pattern is Simplicity 4982 from 1955 and is an original, not a reproduction. It is a vintage size 12, measurements bust 30, waist 25 and hip 33. As an original pattern, there is a lot less ease than in modern patterns. The bodice is fitted and sits snug at the waist with maybe half an inch of ease. It could possibly do with an extra 1cm, but at the same time the closer fit probably helps to keep the bulk of the skirt from weighing the bodice down too much - the dress will pretty much stay in place without the straps because it simply can't sit lower down the waist.

Being an original 1950s pattern the shape of the upper bodice is very much designed to be worn with 1950s undergarments. The top edge of the upper bodice sat flat and correctly, but there was a lot of empty space between the top and the seam with the lower bodice. To remove some of the fullness I made the lower curve shallower and cut the sides of the piece straight rather than angled out to the lower edge. This kept the line of the top edge the same but reduced the height and width of the pattern piece so it was better sized.

The skirt is very wide and full. There are three 1.5m wide panels for a total width of 4.5m, while the bodice is only 66cm. This meant reducing down approximately 7cm of skirt for every 1cm of bodice. I gathered the skirt by hand in three sections, one for each skirt panel. It took approximately an hour to do the gathering and pin it in place, and then 15 minutes to carefully machine stitch it together. I had considered basting it together but ended up deciding the pins would be better at keeping the skirt from being pulled out of alignment while sewing. Because of the weight of the skirt I wanted to make sure the connection to the bodice was very sturdy, so I did a second line of stitching to make the connection more secure.

The bodice of the dress is lined, using a lightweight white lining. I sewed the straps in at the same time as attaching the bodice lining. To make sure I was still able to adjust the length each strap is two pieces: on attached in the front and one attached in the back. The zipper was installed before the lining was attached, and the lining was then machine stitched along the seam allowances joining the bodice pieces to keep the bodice and shell aligned, and hand stitched to the inside of the zipper tape and just inside the skirt seam. As with hand gathering the skirt this was a time consuming process but the finished product looks so much better for the effort.

The final step was to sew up the straps I had left open. As I mentioned there is minimal ease, so the dress sits close to the right spot when strapless. The original pattern actually has a strapless option where the bodice is boned, but I wanted this to be a bit more wearable so I included the straps. I pinned the two sides together at the shoulder before machine sewing at the top then trimming the excess and hand stitching closed. I probably pulled the straps up a couple of millimetres higher than needed, but it is to minor of an issue to be worth unstitching to adjust. 

Despite how big the dress is it only used 2.85m of fabric. The skirt is three panels 1.5m wide by 75cm long, with 30cm for the bodice and straps and another 30cm to line the bodice. The pattern actually suggests the skirt also be lined, but given the weight of this fabric I decided that was unnecessary. I haven't posted every make here on my blog - I may do a roundup post of the ones later - but this brings me to 15.15 metres or 16.5 yards of fabric from my stash used as part of the Whole 30 Fabric Challenge. Just over halfway through, a bit under 15 metres now to go.

I love how this dress turned out. The waist seam is snug so I can't slouch in the dress but the fit is close to perfect. It's feminine and fun and the weight of the fabric makes it very wearable. Although for now it can only be worn at home, this dress is brightening my lockdown days.

Winter's Rust Dress

 

It's cold in locked down Sydney, and my flat is very chilly. So I've been making warm clothes to have something comfortable to wear and also have something to do while stuck inside. This turtleneck dress in merino from The Fabric Store is a great addition to my winter wardrobe.

 A few weeks ago I came across the #whole30fabricchallenge, a challenge to try and use 30 yards (27.4 metres) before buying any new fabric. I have a lot in my stash, and given we are in lockdown due to Covid I have a lot of time to fill, so I'm going to try and give it a go. I'm not sure I'll get all the way through, and I don't think I'll do the rule of starting again if I buy new fabric, but I will get as far as I can. At least until my fabric stash is able to fit in the drawers it's meant to be stored in. With this dress I'm two metres into the challenge.

The pattern is a vintage Simplicity from 1974, Simplicity 5965 and is described as "designer fashion" although it doesn't say which designer. The pattern can be knee length or floor length for a fancier look. I don't tend to wear floor length gowns, so made the knee length version. My version is actually slightly shorter than the pattern's short version because I only had two metres of fabric and the pattern needed 2.15 metres. Where a lot of newer patterns have a lot of empty space on the cutting layout and can be squeezed into smaller pieces of fabric, this one did not have much spare space so I had to shorten the dress front and back pieces by about 5cm. But the pattern gives a generous 2 1/2 inches for the hem and I kept mine to 1.5cm so the finished length is about the same as the original pattern.

The fabric is a double faced merino from The Fabric Store in a deep rust. It is slightly more brown than I thought it was in the store, due to the lights in the back end of the store being slightly warmer than the clearer daylight closer to the windows at the front of the store. However this is a 1970s pattern, so the rust colour matches the era well. The fabric is double faced, so either side could have been the "right" side, but mostly it's thicker, warmer and has more stability. I chose to use the plainer side, as the other side had a very faint stripe which would have been hard to match well on this pattern, especially given fabric amount constraints. It likely wouldn't have been very noticeable, but I wanted to keep this dress looking simple to just have focus on the design lines.

The construction of the dress was quite simple as there are only five pattern pieces: two each for the front and back, two piece sleeves, and the collar. The collar is just slightly loose, so it stays high but doesn't cling. I'm not a fan of tight turtlenecks and skivvies so was a bit worried about how this one would feel, but this is very comfortable. The dress front is gathered slightly along the shoulder seams which gives a small bit of detail and interest while still keeping the simplicity of the dress. There is also a pattern piece for stays to stabilise the gathers on the front where the raglan sleeves join, for which I used bias binding. This was a bit of a deviation from the pattern as it meant I didn't press the seams open, but it keeps everything neat and there is no visible stitching of joining the stays to the sleeves. 

The pattern is a size 8, 31 1/2 inch bust and 24 inch waist and sits comfortably, with a neat fit but not clingy. The pattern has a centre front seam, which I often don't like but works well for this dress. Given it is a knit dress and relatively fitted to the waist, the centre front seam allows for some subtle shaping that wouldn't be possible if it was one piece cut on the fold. The dress would still work either way, but the centre front seam just makes it sit better and look that little bit fancier.

The dress closes with a zipper down the back and buttons for the collar. I was unsure exactly what buttons I wanted for this dress, whether I wanted something to closely match the fabric or have a contrast. I also needed to have at least three buttons for the neck to sit right (the pattern actually recommends 5 buttons) so I went through my button tins and pulled out a whole lot of different options and laid them on the dress to see which I liked best. I chose these vintage pearl buttons out of a tin I inherited from my grandma. They are simple buttons, but the cream colour both complements and stands out from the fabric in a way that works really well. The pattern suggested creating fabric loops for the buttons but the small size of these buttons made that difficult, so instead I've used black hat elastic.

The only thing I'm not entirely happy with is the zipper. I have a large collection of zippers, but didn't have any in shades of brown, deep red or dark tan which would have blended in to the fabric. Given Sydney is currently in a hard lockdown I can't go to a fabric or quilting shop to find a better zipper, and it's not worth ordering a single zipper as shipping would cost at least three times the price of a zipper. I looked through what I had to see which zipper might work and decided on this beige as it's neutral, but it isn't the best zipper installation so it shows more than I would like. I might try and see if I can press the fabric better to lie flatter against the zipper, or if it still annoys me when I'm able to go looking again I might replace the zipper with one in a better matching colour.

I'm very happy with how this dress turned out. It's comfortable, warm and has just a little bit of elegance. I'm certain it will get a lot of wear.

Amber and the Swing Coat

 It's been a long time since my last post. So much so that I've gone from a quintessential summer item to very wintery makes with nothing in between.

The jacket pattern is Simplicity 1319, which appears to now be out of print. It is a 1950s short swing coat with shawl collar. I made the longer length, although it still hits near the top of the hip. The fabric is a beautiful vintage wool I picked up at a Sydney Spoolettes fabric swap a few years back. It's very warm and has good structure and was relatively easy to work with. The lining is basic lightweight voile-weight cotton from my stash in pale baby pink. 

Overall, this pattern was reasonably good with only a few difficult elements. The way the shawl collar is constructed is designed to create pockets, with all the seams hidden inside. Both the lining and self fabric are folded over here, meaning there are four layers of fabric and the instructions for which pieces to fold which way were a bit confusing. I sewed one side what I thought was the right way but when I tried to turn it back the right way around it was twisted, so I had to unpick it, recheck and redo it to get it right. 

The biggest problem was with the length of the sleeves on the lining pieces. The instructions say the sleeve lining should be stitched to the seam allowance where the sleeve joins the cuff with the cuff then folded back in half and stitched down. But the sleeves of the lining piece are at least an inch too short to reach. Fortunately the cuffs are wide enough to fold in and stitch to the lining while still having part of the cuff visible, but it does mean the sleeves are a bit shorter. The pattern envelope shows the sleeves as being this slightly shorter length so I'm not sure if the problem was the illustration or the pattern pieces, but either way it didn't quite work how it was supposed to. 

The dress is the Named Patterns Amber Pinafore. The fabric is a viyella from The Sewing Basket in West Ryde, picked up on another Spoolettes outing. I've used viyella before and it's always been very soft, but this one is slightly stiffer and has a tendency to crease so requires a bit more ironing and effort to keep neat. I actually started making this dress a couple of years ago and never finished it, but pulled it out a few months back.

The waistline sits at just above the natural waist, with the deep v-necked bodice. The bodice pieces are all fully self-lined, but I left the skirt unlined as I didn't have enough of the fabric and didn't want to use a different fabric and possibly change the drape.

The back of the dress is racerback shape and does up with a buckle, but the fabric is prone to fraying so I only installed one eyelet. Only one is needed as it needs to be in the right place for the dress to sit properly and any more eyelets would just be cosmetic. Still, I would have liked to include a few more if the fabric was more stable and I was confident it wouldn't come apart.

The bodice being fully lined meant I was able to play around with how I wanted the check to sit, whether to have the centre front on the straight grain or on the bias. I decided the straight grain looked better, with the horizontal lines matching up more evenly. It also matches well to the skirt, which is approximately a half circle with the lines at the centre of the skirt matching the centre of the bodice and then curving with the bust seams.

I like the shape of the bodice pieces, but they do gape a bit at the sides. I initially thought I might have stitched them in the wrong way around (with the side edges in the centre front and vice versa), but when I tried changing them over the gaped more so I changed them back. I think if I trimmed the side edges to be shorter they would sit flatter, but it's a relatively minor issue and I decided it would take too much unstitching to be worth it to fix.

Overall I'm happy with both of these makes, despite a couple of small setbacks. I've worn the jacket several times already and found it a very good weight for transseasonal Sydney. The dress is something that can probably get wear through much of the year. 

Clear Sky Princess Coat

This coat has been a long time coming. I made my first winter coat back in 2006, when I had minimal experience and had never attempted anything at all comparable in terms of difficulty. It turned out pretty well and I have worn it ever since, but there were errors that I noticed more and more as I got better at sewing - the sleeve is caught slightly, the hem is not very neat, the thread I chose doesn't quite match the fabric, it's not quite warm enough. But making a coat was such a big task and battle with my machine that I put off making another one for a long time.

This coat is made with an Australiam Home Journal pattern that looks to be from the mid-to-late 1950s. Unfortunately Home Journal patterns aren't dated so I can know for sure. The coat has princess seams, a round collar and full-ish skirt. The sleeveheads are fitted, but the sleeves are slightly gathered at the cuffs. I've had the pattern for a few years, but had been daunted about making a new coat. I also wanted to make sure I found the right fabric to use. It needed to be thicker than my older coat, but also in a nice colour - just because it's winter doesn't mean coats have to be muted and dark colours. Wool is normally pretty expensive, too, so I wanted to be very sure and ready before I bought (and potentially ruined) pricey fabric.

I found this wool at The Fabric Store in June. It's thick and warm, and at $42 was surprisingly cheap for wool coating. I loved the crisp winter sky colour, and the fact that it isn't a flat blue. If you look closely, you can see that it's a yarn dyed fabric with some variation from a light blue through to a grey. There's also a bit of pinky grey in the fabric according to all the fluff I cleaned out of my machines. The differences aren't large, but enough to give it some more depth.

Being a vintage pattern, it came in only the one size and did not include seam allowance. Markings on the pattern pieces are almost non-existent, so I had to make sure I paid close attention. I kept the fabric pinned to the pattern pieces until I needed to sew them to make sure I didn't get mixed up. I made only one change to the pattern, lengthening the sleeves as the original is bracelet length. I added about 3 centimetres, so they are long enough to keep my wrists warm but not too long to bunch up on my hands.

It took a long time to get this coat finished, partly because I took a three week break in the middle of making it. I'd been following the instructions closely, but vintage patterns don't give much detail, and no illustrations of the steps. When I got to the cuffs, the instructions just made no sense at all. The weather wasn't cold despite it being winter, so there wasn't a need to get a warm coat finished quickly, so I put it to the side. I reread the instructions every few days but it never made any more sense, so I didn't do any more work on it until the weather was predicted to turn cold again.

In the end I ignored the instructions for the cuffs and just worked it out for myself. They're probably the least neat part of the coat and might have been better if I'd followed the instructions, but I didn't want to run the risk of making a mistake. They still look fine, and I think anything I did to try and 'fix' them would probably end up looking more uneven, so I will just leave them be. And apart from the cuffs it was a smooth - if slow - sew.

Originally I was planning to use a different lining for this coat. I have some vintage 1950s lining with orange and blue roses that perfectly match the wool. Unfortunately, the piece was too small. I tried any and all pattern placements but simply couldn't get them to fit. Luckily I also had this cream and black polkadot lining in my stash, and the piece was big enough for the coat. The polkadots also match the buttons better than the floral lining would have, so I got over my disappointment of not being able to use it this time.

The buttons are also vintage, although I'm not certain when they're from. I found them at Rozelle markets about five years ago. I decided to do snaps rather than buttonholes because the thick wool was hard enough to sew seams, let alone doing buttonholes. I didn't want to run the risk of ruining expensive wool when I could just as easily have decorative buttons and snaps. Hand sewing on eight buttons and snaps did take a lot of time, but I'm happy with the neatness of the end result.

All seams and facings are overlocked to stop fraying. I stitched the princess seams down flat to keep them neat and reduce bulk. Stitching the seams down also accentuates the shape of the seam lines. The side seams aren't stitched down, however, because I added in pockets. In terms of time, there's probably as many hours of work hand sewing as there is machine. The eight buttons and snaps are sewn by hand, as are the facings and cuffs. I considered machine sewing the hem but decided to hand sew that too to keep ot neat.

I am extremely happy with how this coat turned out. It definitely shows the benefit of all the experience I have in the last 13 years in the quality of the stitching and attention to detail. But my machine still wasn't very happy with me making this, so I suspect it will be another 13 years before I make a third winter coat.

Linen Legs

And a third Me Made May post! I made these trousers in the summer to be a lightweight pair to wear to work on hot days. But they are still getting wears little more than a week before winter because the temperature hasn't cooled down yet. They're soft and light and very easy to wear, work appropriate but not overly formal. The top was also made a few months ago, mostly to wear to work but also as a step above casual.

I'm pretty sure the fabric for the trousers is a linen/cotton blend. I bought it as a remnant from an op shop for $2 and there was no tag or detail, but it feels and looks like linen but without so much creasing. I did a burn test and it turned to grey ash, so it is either cotton or linen or a combination. Luckily because it isn't pure linen they don't crush too much, but they do show some creases by the end of the day.

The pattern is Simplicity 8243, a 1940s blouse and trouser pattern described as 'sportswear'. While this is my first time making the trousers I have used the pattern before, making the blouse as my Liberty Blouse. They are a vintage pattern but they don't look costumey. The line drawings on the pattern envelope make the trousers look very loose and wide-legged, but they are actually fairly fitted from the waist to the hips. I noticed the same thing when I made the blouse, the 1940s illustrations are more exaggerated than the final product. 

These are very simple trousers, wide, straight legged, with small pleats at the front. The pockets are stitched closely in to the side which holds them a bit too tight, unfortunately as with so many women's patterns they are also on the small side. The trousers have a centre back invisible zipper and a hook and bar at the waistband. The zipper is an invisible zipper, but I didn't have an invisible zipper foot so it isn't the best insertion, but at least being charcoal in colour it doesn't stand out too badly. Because the fabric is a linen blend all the seams are overlocked to prevent fraying.

The top is the Tonic Tee from SBCC Patterns, made in a floral lycra jersey I got last year from a Spoolettes fabric swap. I'ts a very soft yellow-cream with a touch of pink, with small floral and leaf print. I made the extra small, which was the second smallest size. I chose that size as it's just a little looser which works well for a top that can be worn for work. Because it's slightly looser it looks better when tucked into something with a fitted waist.

 I've been wearing this top and trousers since I made them but only photographed them this morning. Me Made May has been good for getting me to get around to post my backlog of makes, as I document what I'm wearing each day. Whether I keep this pace up after the end of the month is a different question!

The Liberty Blouse

Although it's been a while since I posted, I have done a fair amount of sewing in the past few months, and even photographed a few things, but haven't gotten around to editing the photos and writing about them. This blouse is one I started making in August, although it took over a month to finish.

The fabric is a Liberty of London Tana Lawn from The Fabric Store. The print on the fabric has an art deco feel, so my initial plan was to use a 1930s blouse pattern. Unfortunately the only 1930s blouse pattern I own needed much more fabric, so I took a look back through my patterns to find something more classic that would let the fabric do the talking.

The pattern is a re-released 1940s pattern from Simplicty, number 8243. Despite the stylised art on the pattern envelope, the sleeves are nowhere near as full. I was almost unsure about using this pattern because I didn't want big sleeves, but in the end the fit of the pattern was much slimmer than the drawing suggested.

While the blouse mostly sewed up very easily, one of the buttonholes on the sleeve cuff was very petulant. Part of the difficulty was that the cuffs are close fitting, so the buttonhole needs to be close to the edge. This meant that if I wasn't careful I'd sew over the seam allowances inside the cuff which pushed my stitching out of line. Fortunately, after two failed and unpicked attempts, the third try worked and I was able to finish the blouse off

It took me longer to finish this blouse than I'd planned because of the problems with the cuff. I had worried that I wouldn't finish it in time to wear before the weather warmed up, but since finishing I have been wearing it to work regularly. The Liberty fabric is soft and comfortable, so it's still comfortable to wear the long sleeved blouse in Spring.