The Australian Wildflowers Dress

Although I do own a lot of original and reproduction vintage patterns and sew with them regularly, I do always try and pull them out especially in September for Sew Vintage September. Especially with Covid lockdown again it is nice to be able to see everyone's makes on Instagram and feel connected to others joining in the vintage sewing for the month.

Both the pattern and fabric have been in my stash for several years, although I hadn't really thought about them together. The fabric is such an amazing print but also very large, so it needed something that would do it justice. A full dress was always going to be the best option, but what sort of dress was the question, particularly how to make sure the skirt showed off the print. I had been thinking a circle skirt as it wouldn't hide anything in gathers, but the directional print would have meant some flowers ended up sideways or even upside down. In the end looking through my patterns and fabrics with both Sew Vintage September and the Whole 30 Fabric Challenge in mind led me to pull both fabric and pattern out together for the first time.

This absolutely beautiful fabric is one I picked up at a Sydney Spoolettes fabric swap a few years ago. The fabric design is called Australian Wildflowers and is covered in botanical drawings of different wildflowers, complete with common and scientific names as well as the states and territories they grow in.  There are flannel flowers, spider flowers, swamp and Sydney golden wattle, Cooktown, lemon and blue lady orchids, kangaroo paw, brown boronia, Sturt's desert pea and waratahs among others. The colours are wonderfully vibrant, and although a few arent' quite accurate to the flowers they depict they are all equally lovely drawings.

The pattern is Simplicity 4982 from 1955 and is an original, not a reproduction. It is a vintage size 12, measurements bust 30, waist 25 and hip 33. As an original pattern, there is a lot less ease than in modern patterns. The bodice is fitted and sits snug at the waist with maybe half an inch of ease. It could possibly do with an extra 1cm, but at the same time the closer fit probably helps to keep the bulk of the skirt from weighing the bodice down too much - the dress will pretty much stay in place without the straps because it simply can't sit lower down the waist.

Being an original 1950s pattern the shape of the upper bodice is very much designed to be worn with 1950s undergarments. The top edge of the upper bodice sat flat and correctly, but there was a lot of empty space between the top and the seam with the lower bodice. To remove some of the fullness I made the lower curve shallower and cut the sides of the piece straight rather than angled out to the lower edge. This kept the line of the top edge the same but reduced the height and width of the pattern piece so it was better sized.

The skirt is very wide and full. There are three 1.5m wide panels for a total width of 4.5m, while the bodice is only 66cm. This meant reducing down approximately 7cm of skirt for every 1cm of bodice. I gathered the skirt by hand in three sections, one for each skirt panel. It took approximately an hour to do the gathering and pin it in place, and then 15 minutes to carefully machine stitch it together. I had considered basting it together but ended up deciding the pins would be better at keeping the skirt from being pulled out of alignment while sewing. Because of the weight of the skirt I wanted to make sure the connection to the bodice was very sturdy, so I did a second line of stitching to make the connection more secure.

The bodice of the dress is lined, using a lightweight white lining. I sewed the straps in at the same time as attaching the bodice lining. To make sure I was still able to adjust the length each strap is two pieces: on attached in the front and one attached in the back. The zipper was installed before the lining was attached, and the lining was then machine stitched along the seam allowances joining the bodice pieces to keep the bodice and shell aligned, and hand stitched to the inside of the zipper tape and just inside the skirt seam. As with hand gathering the skirt this was a time consuming process but the finished product looks so much better for the effort.

The final step was to sew up the straps I had left open. As I mentioned there is minimal ease, so the dress sits close to the right spot when strapless. The original pattern actually has a strapless option where the bodice is boned, but I wanted this to be a bit more wearable so I included the straps. I pinned the two sides together at the shoulder before machine sewing at the top then trimming the excess and hand stitching closed. I probably pulled the straps up a couple of millimetres higher than needed, but it is to minor of an issue to be worth unstitching to adjust. 

Despite how big the dress is it only used 2.85m of fabric. The skirt is three panels 1.5m wide by 75cm long, with 30cm for the bodice and straps and another 30cm to line the bodice. The pattern actually suggests the skirt also be lined, but given the weight of this fabric I decided that was unnecessary. I haven't posted every make here on my blog - I may do a roundup post of the ones later - but this brings me to 15.15 metres or 16.5 yards of fabric from my stash used as part of the Whole 30 Fabric Challenge. Just over halfway through, a bit under 15 metres now to go.

I love how this dress turned out. The waist seam is snug so I can't slouch in the dress but the fit is close to perfect. It's feminine and fun and the weight of the fabric makes it very wearable. Although for now it can only be worn at home, this dress is brightening my lockdown days.

Winter's Rust Dress

 

It's cold in locked down Sydney, and my flat is very chilly. So I've been making warm clothes to have something comfortable to wear and also have something to do while stuck inside. This turtleneck dress in merino from The Fabric Store is a great addition to my winter wardrobe.

 A few weeks ago I came across the #whole30fabricchallenge, a challenge to try and use 30 yards (27.4 metres) before buying any new fabric. I have a lot in my stash, and given we are in lockdown due to Covid I have a lot of time to fill, so I'm going to try and give it a go. I'm not sure I'll get all the way through, and I don't think I'll do the rule of starting again if I buy new fabric, but I will get as far as I can. At least until my fabric stash is able to fit in the drawers it's meant to be stored in. With this dress I'm two metres into the challenge.

The pattern is a vintage Simplicity from 1974, Simplicity 5965 and is described as "designer fashion" although it doesn't say which designer. The pattern can be knee length or floor length for a fancier look. I don't tend to wear floor length gowns, so made the knee length version. My version is actually slightly shorter than the pattern's short version because I only had two metres of fabric and the pattern needed 2.15 metres. Where a lot of newer patterns have a lot of empty space on the cutting layout and can be squeezed into smaller pieces of fabric, this one did not have much spare space so I had to shorten the dress front and back pieces by about 5cm. But the pattern gives a generous 2 1/2 inches for the hem and I kept mine to 1.5cm so the finished length is about the same as the original pattern.

The fabric is a double faced merino from The Fabric Store in a deep rust. It is slightly more brown than I thought it was in the store, due to the lights in the back end of the store being slightly warmer than the clearer daylight closer to the windows at the front of the store. However this is a 1970s pattern, so the rust colour matches the era well. The fabric is double faced, so either side could have been the "right" side, but mostly it's thicker, warmer and has more stability. I chose to use the plainer side, as the other side had a very faint stripe which would have been hard to match well on this pattern, especially given fabric amount constraints. It likely wouldn't have been very noticeable, but I wanted to keep this dress looking simple to just have focus on the design lines.

The construction of the dress was quite simple as there are only five pattern pieces: two each for the front and back, two piece sleeves, and the collar. The collar is just slightly loose, so it stays high but doesn't cling. I'm not a fan of tight turtlenecks and skivvies so was a bit worried about how this one would feel, but this is very comfortable. The dress front is gathered slightly along the shoulder seams which gives a small bit of detail and interest while still keeping the simplicity of the dress. There is also a pattern piece for stays to stabilise the gathers on the front where the raglan sleeves join, for which I used bias binding. This was a bit of a deviation from the pattern as it meant I didn't press the seams open, but it keeps everything neat and there is no visible stitching of joining the stays to the sleeves. 

The pattern is a size 8, 31 1/2 inch bust and 24 inch waist and sits comfortably, with a neat fit but not clingy. The pattern has a centre front seam, which I often don't like but works well for this dress. Given it is a knit dress and relatively fitted to the waist, the centre front seam allows for some subtle shaping that wouldn't be possible if it was one piece cut on the fold. The dress would still work either way, but the centre front seam just makes it sit better and look that little bit fancier.

The dress closes with a zipper down the back and buttons for the collar. I was unsure exactly what buttons I wanted for this dress, whether I wanted something to closely match the fabric or have a contrast. I also needed to have at least three buttons for the neck to sit right (the pattern actually recommends 5 buttons) so I went through my button tins and pulled out a whole lot of different options and laid them on the dress to see which I liked best. I chose these vintage pearl buttons out of a tin I inherited from my grandma. They are simple buttons, but the cream colour both complements and stands out from the fabric in a way that works really well. The pattern suggested creating fabric loops for the buttons but the small size of these buttons made that difficult, so instead I've used black hat elastic.

The only thing I'm not entirely happy with is the zipper. I have a large collection of zippers, but didn't have any in shades of brown, deep red or dark tan which would have blended in to the fabric. Given Sydney is currently in a hard lockdown I can't go to a fabric or quilting shop to find a better zipper, and it's not worth ordering a single zipper as shipping would cost at least three times the price of a zipper. I looked through what I had to see which zipper might work and decided on this beige as it's neutral, but it isn't the best zipper installation so it shows more than I would like. I might try and see if I can press the fabric better to lie flatter against the zipper, or if it still annoys me when I'm able to go looking again I might replace the zipper with one in a better matching colour.

I'm very happy with how this dress turned out. It's comfortable, warm and has just a little bit of elegance. I'm certain it will get a lot of wear.

The Wild Meadow Gown

This dress is the Friday Pattern Company's Wilder Gown, which seems to be the current most popular pattern. I can see why it's so popular - it's fairly easy to make and easily adjustable and adaptable. It's loose fitting, but doesn't feel oversized, has a 70s influence but doesn't feel costumey. It has a bit of a secret pyjamas feel but is still very much wearable in public.

The fabric is a viscose rayon satin from My Hung Fabrics in Hurstville. I bought the fabric specifically for the pattern. I really liked the all over floral print, particularly the fact it has the feel of an overgrown meadow. The print is directional with the flowers all growing along the grainline, but because of the overgrown feel it isn't overly noticeable, which was lucky given I accidentally cut the bodice front pieces out upside down. The fabric is wonderfully soft with a subtle shine and an excellent drape, but it does fray a lot. Each seam is overlocked to protect the fabric from falling apart.

The pattern is easy to follow, with only a small number of pieces. The skirt is two tiers of gathered rectangles, two for the first tier and three for the second. Folded in half, my fabric was slightly narrower than the pattern piece, so for the first tier I just used the width of the fabric. The second tier is three pieces, two slightly narrower and one the correct width. 

I chose to make the gown with short sleeves and also shorten the length slightly so it wouldn't look quite so much like a nightie. The length of the full dress would have sat at a slightly awkward length, almost a maxi dress but not quite, so I made the second tier shorter by cutting it off at the lengthen/shorten line. 

Construction is generally very straightforward but I did have some issues with gathering the skirt tiers. The first line of gathering stitches I put in were too close to the edge of the fabric, which given the fabric's habit for fraying meant I wasn't able to gather the whole way along. I removed those stitches and did new gathering lower than the seam line which gathered in quite well. It did mean I had to remove that line of stitching from the finished garment, but it also avoided any more frustrations. 

The one new element to me was the gathered neckline. The pattern pieces have an extended neck almost like a turtleneck which is folded over and stitched with two lines of stitching about an inch apart, with the neck tie piece threaded through the channel between the stitching lines. This then gathers the dress when worn, pulled as loosely or tightly as desired.

I think this dress will get a lot of wear in these warmer months. Because of the print and the length I was slightly worried the dress might be a bit overwhelming, but I'm really happy with how it turned out. The only negative is that the fabric is slightly warmer than I expected it to be. The large amount of fabric gathered at the high neckline definitely contributes to that, so tying it more loosely might be one option. Overall, though, it's a lovely, dreamy, floaty dress that's both an enjoyable make and an enjoyable wear.

The Out-Of-Office Work Dress

This dress was meant to be a new office-appropriate winter dress for resuming normal work. But we're still working from home for the foreseeable future, so instead it's office-appropriate dressing for my desk in my lounge room at home.

The lovely fabric is from The Fabric Store, and was a remnant I picked up last winter. The fabric is double sided orange and ruby, so it obviously needed a pattern that would show both. The orange side is merino, the ruby is nylon. It's a stable knit, so it's very easy to work with and maintains its shape very well.

I had initially been thinking of making a 1960s mod-style dress with contrasting bands at the neckline, waist, sleeve bands and hem, but I couldn't find a pattern that matched the image in my head. As the fabric is a remnant piece I had a limited amount of fabric, so I was a bit unsure about coming up with a dress without a pattern. So I decided to do some image searching for two tone dresses for inspiration, and found a few wrap dresses that looked really great.

After looking through different patterns, I found one that I thought would work well in two colours. The pattern is a Nancy Zieman wrap dress for McCalls, M7893. This is version A with an asymmetrical hem but with the longer sleeves of version B. The two sides of the asymmetrical hem are designed to reach a neat point, but as soon as you stop standing perfectly still they do move out of place.

While the dress is two toned, the pattern isn't. The back piece in the pattern is cut on the fold, rather than as two pieces. Cutting the back as two pieces was easy enough, but making sure I laid out the left and right fronts and each sleeve correctly so all the left side would be orange and the right side red took a bit more care. I also used matching threads for each side, changing over when I reached the centre back.

 It's unfortunate this dress isn't quite getting the wears I intended for it this year because I really like it. I'm still wearing it a bit, but it's not really an at home dress. Luckily the fabric is lovely and great quality, so even if the weather is starting to warm up now, there will be many other winters for it to be worn.

Wagtail Dress

It's been a while since I last blogged, but it's not because I haven't sewn. I made this dress back in August and have worn it a dozen or more times since. It was even photographed in December, just waiting for me to get around to writing about it on here.

The fabric is a Jocelyn Proust design from Spotlight, with a Willy Wagtail print. Jocelyn Proust makes great fabrics, mostly with Australian flora and fauna prints. The pattern is Vogue 9199. It's a Very Easy Vogue pattern, and I don't think I've made one before. I was looking for a simple knit dress pattern and this was what I could find. I almost dismissed it because the illustration on the front isn't great, but I was wanting a pattern to make a dress to take on holiday so had to go with what was available.

Because the print is directional it turned out I didn't have enough fabric to make the dress exactly as it is in the packet - the pieces were slightly too wide and the fabric slightly too narrow, and the print wouldn't work with some upside down birds. So I decided to cut the bodice half using the pattern and then use the leftover fabric to do a simple rectangle skirt. It wasn't enough to be able to do even gathers around the entire waistline, so I just did gathers at the four princess seams - two at the front and two at the back.

The fabric is lovely to sew with. It's a relatively thick jersey with moderate stretch that retains its shape well but isn't too hot to wear. It goes through the machine smoothly, and has kept its colour and stretch through multiple washes (the benefit of not writing a post until six months after finishing a make is I can review how it holds up in real life). 

 The pattern is a slightly looser fit than I had originally planned, but I do still like it. I think it works better with the rectangle skirt than it would with the full length princess seams as it gives it that slight bit more shape. But I really like the neckline and the sleeve shape and length. A good cap sleeve that is fitted but still allows movement is often hard to find in sewing patterns - too many are restrictively tight or far too long but these are just right.

Given I've worn this dress many times I'm obviously happy with the outcome. It's a comfortable, easy to wear dress, and the print is fantastic. I'm not sure if I'll make the pattern itself again, but might use it as the basis for making t-shirts, removing the princess seams. At the very least I will use the sleeve pieces in the future.

Temperatures Climbing Dress

What do you do when it's going to be 40 degrees celsius (104 fahrenheit) and you still need to go to work? You make a light, loose dress the night before in preparation.

It's already been a hot summer here, and we're barely two weeks in. When the forecast for Thursday was for a 40 degree day I had a look through my wardrobe but there was nothing that was cool enough and ok to wear to work. So I decided I'd grab some cotton from my stash and make something.

Initially I was thinking of making a more typical sundress and even selected a pattern, but then realised its large number of pieces, zipper and fitted shape would be more complicated and be hard to get done in one night. So I decided a loose shape would be best, something with minimal shaping and only a few pieces.

I didn't use a pattern for this dress, instead drawing a quick sketch of the image in my head on my phone's note taking app. I decided to make the front with three pieces with diagonal seams to give a hint of shape. Although I didn't use a pattern the trapeze shape and lines are similar to a few other patterns, such as the Collins Top from In The Folds or the Sway Dress from Papercut Patterns.

The fabric is a Liberty of London tana lawn, Howells Ladders in orange/yellow from The Fabric Store. Tana lawn is beautifully soft and light, which makes it perfect for the heat. And the ladder print goes well with the "climbing" name for the post.

Because I didn't use a pattern the dress isn't quite perfect. The neckline is a little deeper than planned, the shoulders a little wider, the length a centimetre or two short. It's probably more of a beach coverup than workwear, but on extreme heat days comfort is the key.

It has been a long time since my last update, but I do have a few makes from this year that are ready for photographing and posting. Now that this very busy year is almost over, hopefully I'll have time to catch up a bit.

The Meridian

This is the Meridian Dress from Papercut Patterns. I've made quite a few patterns from Papercut and always find them well designed and clear to follow. The styles are relatively straightforward but often have nice design details that make them a little more interesting. The shape of this dress is pretty simple but the shaping the waist ties give to the bodice a lovely shape.

The fabric is a vintage Viyella I was given by a friend of my parents. Her aunt had a large fabric collection, and I was given this Viyella and a few pieces of raw Thai silk from the 1940s/50s. I have no ideas for the silk, but this Viyella obviously had to be a winter dress. Luckily it's the right time of year here to make a long sleeve wool dress. Being Viyella it's beautifully soft, light and warm.

This dress is the shorter length version of the Meridian Dress with long sleeves. I didn't make any adjustments in making it, and made a straight size XXS. The dress is pretty straightforward to sew. The front bodice pieces are a little confusing, and there was initially a slight gap when connecting the bodice and skirt pieces together. Because the bodice has a centre front seam as well as the ties it is a bit awkward joining it to the skirt. What I found worked was following the pattern and the stitching up the small gap the was left in the centre front. Given that the ties wrap across it also doesn't matter if the stitching is perfect because it will be hidden anyway when worn.

Viyella tends to fray so all the seams are overlocked, including inside the waist ties. The back is closed with a zipper and button. The button is a self cover button made with one of the leftover scraps. I bought an invisible zipper foot for my Janome machine so this invisible zipper is properly sewn in. I was even able to match the print up almost as close to perfect as possible. I had been pretty careful with the layout of the pattern on the fabric to try and make sure it would match on the back as that's the most visible seam, and the bodice back worked out really well. The bodie front is not evenly matched, but given the wrap ties it isn't really noticeable.

The dress sits at just above the natural waistline on me. I find Papercut's patterns are often slightly short in the waist. I'm 5'6" but longwaisted so with the skirt this pattern is still the correct length but I have found a few of their patterns in the past ended up a little shorter than I wanted. However being a narrow build, for this pattern the ties wrapping around at a low empire line probably works better than if they sat at my natural waist.

I made this dress back in June and photographed it in early July. It's been worn a few times in the last two months and has gotten many compliments. It's a very easy dress to wear - really the only thing slightly awkward with this dress is ironing the ties without leaving creases in the bodice. But overall it's a simple thing to throw on and a relatively easy sew for something that looks fairly elegant and much fancier than it is to make, which is generally my favourite type of pattern.